Zero Rust Application Instructions:

Preparation and Application

Surface Preparation

• New Steel – Thoroughly clean all surfaces. For new Galvanized Steel, use a vinyl wash primer before applying Zero-Rust®.
• Rusty Surfaces – Remove all loose scale and powdery rust. Thoroughly clean surface of any dirt, grease or other contaminants.
• Partially Painted Surfaces – When repairing a painted surface that has deteriorated totally remove old paint.

Zero Rust® Application

• Mix thoroughly before and occasionally during use
• Apply Zero-Rust® by brush, roller or spray
• For best results apply a minimum of two coats
• Apply in a crisscross pattern from one coat to the next
  
• Select two dissimilar colors for each coat
• Apply 28-60 Red or 28-62 Black as first coat
• Do not apply in heavy films
• Allow a minimum of 30 minutes flash off time between coats
  
• Zero Rust® dries to the touch in 30-60 minutes
• Clean up with MEK, Xylene or Lacquer thinner
• Refer to the Zero Rust Application Instructions for detailed application procedures
  

DOWNLOAD ZERO RUST APPLICATION INSTRUCTIONS